Interconnecting Cisco Networking Devices Exam (ICND 640-811)

Implementation and Operation is one of four major topic categories on the CCNA ICND 640-811 exam. There are currently 17 CertZone Study Guides that address the items listed under this category. The blueprint item and the CertZone Study Guides that address the item are listed below. You can go directly from this list to the Study Guide by clicking on the Study Guide name.

II. Implementation and Operation

1. Perform an initial configuration on a switch
2. Configure routing protocols given user requirements
3. Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
4. Configure a router for additional administrative functionality
5. Configure a switch with VLANS and inter-switch communication
6. Implement a LAN
7. Customize a switch configuration to meet specified network requirements
8. Implement access lists
9. Implement simple WAN protocols

II. Implementation and Operation

1. Perform an initial configuration on a switch
   

   LAN Switching
   Layer 2 Switching and Bridging
   Layer 2 Switching - Virtual Local Area Networks (VLANs)
   New Age Bridging and Switching
   Layer 1 and Layer 2 Ethernet
   Basic Router Operation

2. Configure routing protocols given user requirements
   

   IP Routing
   Basic Router Operation
   OSPF in Single Areas: Learning the Protocol
   Layer 2 Switching and Bridging

3. Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
   

   Topology and IP Addressing
   Layer 1 and Layer 2 Ethernet

4. Configure a router for additional administrative functionality
   

   Basic Router Operation

5. Configure a switch with VLANS and inter-switch communication
   

   Layer 2 Switching - Virtual Local Area Networks (VLANs)
   Layer 2 Switching and Bridging

6. Implement a LAN
   

   LAN Switching
   Layer 2 Switching - Virtual Local Area Networks (VLANs)
   Layer 2 Switching and Bridging
   OSI Reference Model
   Layer 1 and Layer 2 Ethernet

7. Customize a switch configuration to meet specified network requirements
   

   New Age Bridging and Switching
   LAN Switching
   Layer 2 Switching and Bridging
   Layer 2 Switching - Virtual Local Area Networks (VLANs)

8. Implement access lists
   

   Access Denied: Network Security with Cisco Routers
   Network Management
   The Other VPNs: It's Not All MPLS
   Layer 2 Switching - Virtual Local Area Networks (VLANs)
   ISDN and DDR
   

9. Implement simple WAN protocols
   

   WAN Protocols
   Address Resolution Protocol (ARP)
   Physical Internetworking and Industry Standards for Networks
   OSI Reference Model
   Network Management
   Layer 2 Switching and Bridging
   Basic Router Operation