Date of Issue: 11-01-2023

Multicast Lab Scenario 2 -- Troubleshooting

This lab scenario is designed to repair a poor multicast deployment in a network using Auto-RP and IP PIM sparse mode. It is intended to challenge your multicast troubleshooting skills as well as cover IP PIM sparse mode. This lab works best if you can duplicate the lab setup used, but if you cannot, try to adapt the lab to your own lab configuration. This lab will cover both the routers and the Catalyst switch. Numerous issues need to be addressed for this lab to work correctly.

Introduction
Initial Configuration
  R1's Starting Configuration and Unicast Routing Table
  R2's Starting Configuration and Unicast Routing Table
  R3's Starting Configuration and Unicast Routing Table
  R5's Starting Configuration and Unicast Routing Table
  R6's Starting Configuration and Unicast Routing Table
  Catalyst's Starting Configuration
Network Specifications
Hints
Solutions
Final Configurations and Routing Tables
  R1
  R2
  R3
  R5
  R6
  Catalyst 5000 Final Configuration
  Lightstream 1010 Final Configuration